Help Center

Please choose the rear sight picture:

• M91/30 - Features a flat sight leaf on a tangent base with graduations from 1 to 20
  
  
  

If your Mosin Nagant M91/30 has a Hex receiver: 

For regular scopes: Gen 4 Mosin Nagant NDT Scope Mount M9130 Hex Receiver
For scout (LER) scopes: Gen 2 Mosin Nagant NDT Scout Mount

If it has a round receiver:

For regular scopes: Gen 4 Mosin Nagant NDT Scope Mount M9130 Round Receiver
For scout (LER) scopes: Gen 2 Mosin Nagant NDT Scout Mount

• M91 - Model 1891 - has a rear sight base with notches. Russian M91 bases have 5 notches and Finnish M91 bases usually have an extra notch and marked 2 (200 Meters)
  
  

  

• M44, M38 or T53 (Chinese) has a shorter flat sight leaf on a tangent base with graduations from 1 to 10
  

• Finnish Mosin Nagant M39 has "ears" at the rear to protect the leaf

For regular scopes: Full-length Scope Mount for Finnish Mosin Nagant M39
For scout (LER) scopes: LER Scout Mount for Mosin Nagant M39

Please select the rear sight and handguard picture below:

• Mauser Karabiner 98k, AKA K98k, 98k has a flat sight leaf on a tangent base

This including German, Russian Captured and Israeli converted Mauser K98k. They also have shorter handguards that start in front of the rear sight.

• For regular scopes: Ultra Low-profile Mauser K98k NDT Scope Mount
• For scout (LER) scopes: Mauser K98k Scout Mount for long eye relief scopes

• Yugoslavian Mauser M48 or M48A has a flat sight leaf on a tangent base and a bent bolt; the handguard wraps around the rear sight and has a rear sight/handguard retaining screw:

• For regular scopes: Mauser M48 Zastava Yugoslavia NDT Scope Mount
• For scout (LER) scopes: Low-Profile Scout Mount for Yugo M24/47, M48, Turkish 1938, Spanish M43

• Yugoslavian Mauser M24/27 - has the same rear sight and handguard as M48 but has a straight bolt:

• Czechoslovakia Mauser VZ. 24 - has a flat sight leaf on a tangent base and the rear sight ramp is removable. VZ.24 has a straight bolt.

• Spanish Mauser M43 (NOT Model 1916 or 1913) has a flat sight leaf on a tangent base and a straight bolt

• Turkish Model 1938, including K.Kale, ASFA/ANK ARA:

• Columbian R. Famage 30-06 Mauser has the "F. FAMAGE" stamped on the side of the receiver:

Please select the rear sight and bolt picture below:

K31 has an aluminum bolt handle and the rear sight is right in front of the receiver:

For regular scopes: Gen 4 Swiss K31 NDT Scope Mount
For scout (LER) scopes: Swiss K31 Ultra Low-Profile NDT Scout Mount

1911 Long Rifle or K11 Carbine have plastic bolt handle and the distance between the rear sight and the receiver is longer than K31:

We accept Canadian dollars only. However, PayPal and most credit cards allow you to pay in foreign currency, e.g. in Canadian dollars if you don't have a Canadian credit card. Some credit cards will charge you a "Foreign Transaction Fee" ranging from 1.5% to 3%. Please call your card issuer to find out the foreign transaction fee they charge. 

We accept Visa, MasterCard, and PayPal.

Yes, you can pay with debit cards via PayPal, without a PayPal account. Here's how:

On the checkout page, click on PayPal:

Then click on "Try another way" and "Pay with debit or credit card": 

For orders shipped to United States, please visit https://www.BadAceTactical.com

Unfortunately there is not a simple "yes" or "no" answer, because every country is different. It depends on your country's laws and regulations. Please read our international ordering policy:

International (outside of Canada and USA) Ordering

• International orders are shipped via CanadaPost. There is no delivery guarantee on international orders. We have no control over customs, international taxes, or other charges imposed by countries outside of the US and Canada.
• We (Ace Recreational Equipment and Services Limited) are NOT responsible for international shipping delays, such as customs delays and are not responsible for any customs. The buyer assumes all responsibilities of claims made with the shipping carrier and all duties/fees incurred on the shipment. Please contact info@badacetactical.com if you have any questions.
• Leaving a valid phone number is highly recommended in case the customs office of your country needs to contact you for importing fees or taxes.
• All international packages must include a customs form with values of the products. Please do NOT ask us to remove the value or claim it as a gift. Without the customs form, the postal office/customs office will reject the package.

Please see our store policies page: 

Please check your email spam folder first and make sure that emails from info@badacetactical.com are labeled as NOT spam.

You will receive an email after your order is shipped. 

Click on "View your order" and then click on the tracking number to see the detail tracking information of your packet:

You will receive an email after your order is shipped. 

Click on "Click here to download your PDF receipt" to download the receipt:

Any good quality picatinny rings will work. We recommend Vortex rings: 

https://vortexoptics.com/riflescopes/riflescope-rings-and-mounts.html

You can use this scope ring height calculator to calculate the proper height of rings: 

https://www.scopedout.com.au/ring-height-calculator/

All BadAce scope mounts have Picatinny rails and take both Weaver and Picatinny rings.

This wikipedia page provides some good information and history of the Picatinny rail: 

Long eye relief scopes, also called scout scopes, are scopes that generally have an 8 – 12 inches eye relief. 

Comparing to regular eye relief scopes ( 2 – 5 inches eye relief), LER scopes are mounted forward of the action. This allows fast sight acquisition and the use of stripper clips for fast reloading.

We recommend the Burris scout riflescope 2-7x32mm

It has a 9.2 - 12 inches eye relief and comes with the Burris forever warranty. 

Or the Hi-Lux Optics Long Eye Relief 2-7x32mm Riflescope

It features 8.7 - 13.2 inches eye relief and a slim profile. It offers great qulity with very competitive price. We've never had any problem with the Hi-Lux. However, it does not come with a lifetime warranty. 

All our scope mounts can accommodate straight bolts. However, regular eye relief scopes ( 2 – 5 inches eye relief ) are mounted further backward so you wouldn’t be able to close the bolt if you choose the regular scopes.

The solution is to use a long eye relief scope (8 – 12 inches eye relief) and our long eye relief (scout) scope mount:

Yes, the full-length NDT scope mount vibrates during the shooting. In fact, all scopes vibrate due to the recoil. Watch this video how this steel scope mount and scope vibrates:

https://youtu.be/-iJC-E0yPOA?t=14

All quality scopes are designed to withstand the recoil force that is far more violent than this up/down the vibration. The most powerful impact to the scope is the back/forward motion after the round is fire. This video will give you an idea of how scopes are tested against shock:

https://www.youtube.com/watch?v=ohdjG27NNzs

The vibration does not affect the accuracy because the NDT scope mount goes back to the same position after every shot. This is the same with the rifle barrel – the barrel vibrates during the shooting (called barrel whip), but as long as it goes back to the same position after the vibration it will not affect the accuracy. This is why shooters free float their barrel for accurate rifle shootings.

We’ve done our own field testing as well. We’ve shot 240 rounds surplus 7.92x57 with K98k scope mount and more than 300 rounds of Russian surplus 7.62x54R with the Mosin Nagant scope mount and both rifles hold zero. The scope that we used were Vortex Crossfire II 4-12x40 AO – they are entry level good quality scopes.